SE Bikes Vans PK Ripper Looptail BMX Bike Red 2021 Collector

SE Bikes – SE Vans PK Ripper Looptail BMX Bike Red 2021 Collector

FEATURES

• Vans edition 6061 aluminum PK Ripper frame w/ floval tubing, looptail rear end, seatstays wrap, Diamond Dropouts
• Limited Edition & Individually Numbered on the Inside of the Rear Dropout
• Full Cr-Mo “Off the Wall” Landing Gear forks
• Cr-Mo Power Wing bars
• Vans x Cult Grips with rubber SE end plugs
• Vans x Cult 20″ x 2.1″ Tires
• Double-wall rims with sealed bearing SE Mohawk hubs
• Vans Checkerboard Padset, ’66 Dice Valve Caps, Alloy Rear Wheel Washers
• 24 pounds

SPECIFICATIONS

• FRAME:Vans Edition, 6061 Aluminum Floval Tubing, Looptail Rear End, Seatstays Wrap, Retro Diamond Shape Dropouts, 68mm American Bottom Bracket, Limited Edition & Individually Numbered on the Inside of the Rear Dropout
• FORK:“Off the Wall” Landing Gear, Full Cr-Mo
• CRANKSET:SE TSC Cranks, 180mm, Sealed Bearing American Bottom Bracket, 141mm Spindle Length, 19mm Spindle Diameter, Alloy Spider, 44T Alloy Chainring
• PEDALS:X-Pedo Low-profile Platform w/ Removable Pins
• CHAIN:KMC Z6
• WHEELSET:Sealed Bearing SE Mohawk Hubs, 36H High-Flange Alloy, w/ Double-wall Rims, 16T Freewheel, Stainless Spokes
• TIRES:Vans x Cult Tires, All Over Tread Design, Vans Waffle Sole Pattern, 20″ x 2.1″ Front & Rear
• BRAKESET:Tektro C-310 V-Brake, Slick Cable
• BRAKE LEVERS:Tektro 316A, 2-Finger Alloy
• HEADSET:Aluminum Cups, 1-1/8″ Threadless, SE Wing Logos on Bottom Cup
• HANDLEBAR:Cr-Mo Power Wing, 29″ x 8.25″, 10 Backsweep, 1 Upsweep
• STEM:Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, Hidden Top Cap, 55mm Reach
• GRIPS:Vans x Cult Grips, Waffle Sole Pattern, Made in USA
• BRAKESET:Tektro C-310 V-Brake, Slick Cable
• BRAKE LEVERS:Tektro 316A, 2-Finger Alloy
• HEADSET:Aluminum Cups, 1-1/8″ Threadless, SE Wing Logos on Bottom Cup
• HANDLEBAR:Cr-Mo Power Wing, 29″ x 8.25″, 10 Backsweep, 1 Upsweep
• STEM:Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, Hidden Top Cap, 55mm Reach
• GRIPS:Vans x Cult Grips, Waffle Sole Pattern, Made in USA
• SEAT:SE Racing Old School
• SEATPOST:Micro-Adjust Alloy, 27.2mm
• SEAT CLAMP:SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
• ACCESSORIES:Vans Checkerboard Padset, ’66 Dice Valve Caps, Alloy Rear Wheel Washers
• WEIGHT:24 lbs / 10.86 kgs

GEOMETRY

• TOP TUBE, ACTUAL:21″
• SEAT TUBE, CENTER TO TOP:10.2″
• SEAT TUBE ANGLE:71
• HEAD TUBE ANGLE:74
• CHAINSTAY LENGTH:14.75″
• WHEELBASE:37.7″
• BOTTOM BRACKET HEIGHT:11.7″
• STANDOVER:22.5″
• SUGGESTED RIDER SIZE:5’3″+ (160cm+)
• STEM:55mm
• HANDLEBAR WIDTH:28.5″
• CRANK:180mm
• WHEEL SIZE:20″
• SEAT POST DIAMETER:27.2mm